Today we introduce one stainless steel side table with original plain finish; there is no plating colors at all, only the shinning mirror effect of original surface of stainless steel. The whole stainless steel side table expresses simple, natural and fresh feelings. Also the transparent tempered glass used as the top, which make the table looks clear from top to bottom. The mirror surface used to comply with the entire effect.

Mirror finishing is the best effect we can have on stainless steel before the plating technology available, and it is easy to accomplish on stainless steel material. On this stainless steel side table, all the joint positions are polished to remove the welding dots and have the clear surface to comply with the finish of the tubes. It took a lot of time and work to do this job as any possible defects would looks bigger on product, as there is no cover of colors.

Image there is one welding dot at the joint position between two legs of the stainless steel side table, it would look very obvious and lower the grade the product. So it needs the workers to be very careful when during the welding, make sure the connection clear but also need to ensure the legs welded strong enough. Otherwise some of the tubes may get off after transportation or use.

The tempered glass used a lot in decoration field, for example there would big size of the glass needed for laser cut metal screens, the glass used to cover the pattern of the screens from two sides; also the stainless steel door use glass as the middle part besides the stainless steel frames. For the glass on this stainless steel side table, it is a little special as it placed horizontally, and no grooves to fix it. The no-shadow glue will be used to connect it with the metal table.