Because the laser cut screens are made of metal panel and the design of the pattern is very artistic. The metal may give a cold or tough feeling and there maybe sharp on the surface which may hurt people, so the accessories are needed to make the screens safe and dress up.

Acrylic ( Plexiglass )

< Used to cover the screens, provide the protection to avoid the harm maybe caused by the sharp surface of the metal screen, its smooth surface is total safe and friendly to people. You can use the acrylic sheet to cover one side of the screen, which face to people or to cover both two sides if it is displayed omnibearingly. The thickness less than 8 mm would be better if both two sides are protected, otherwise it would be too heavy. Sunshine stone and lights

For the interior laser cut screens, it may looks dark even it’s colored. The suitable lights on the plated metal surface can highlight the decoration effect. There’s another way to do the lighting by using sunshine stone. The sunshine stone is one kind of stone which is non opaque. We put the stone behind the screen and take it as the background. The colored stone with figure form the light effect when there the light penetrates. It is not strong and it collocates with the colored screen surface.




Besides, the installation screws are needed often. The expansion bolts will fix the screens well but won’t affect the appearance. There would be the connecting bolts if the screens are too large and it has to be made in several parts. The screens split into several pieces and we connect them as one complete part when we install it.